assignment 12
Assignment 8 and 9
Popular posts from this blog
arch1
The second assignment : “we had to cut a cartridge paper by 22×29 cm and 7 black squares by 2×2 cm, then we needed to create a 2D design with those black squares on white cartridge paper.” Conclusions (2nd assignment): “we should be aware not to create another shape from the tiny squares,there will be an logical and eye pleasing view after the work was done."
Daylight and colore
We learned about the impact of daylight in architecture and its importance in perceiving plasticity,textures,etc. There are different ways the daylight is used but we will talk about three main ones: 1- Bright open hall , It's a roof supported by columns and it is opened in the sides and the light in there differs from the light outside. A lot of light doesn't mean it is a good light(a front light is considered a "poor" light). Good quality of t extures and plasticity makes a good light . 2- The room with a skylight , is a room or a building with the daylight entering from the top.It is the only lighting source,and it satisfies the need of the room for light.It creates good textures and plasticity.We learned about Partheon and the way it was build. 3- The room with the light entering from the side ,is the most used natural lighting,because it is a very good light . We learned how the light changed on the inside when only the two upper shutters were opened (same...
Comments
Post a Comment